xboxscene.org forums

Author Topic: Chameleon Install Pics, Please  (Read 400 times)

mikearama

  • Archived User
  • Jr. Member
  • *
  • Posts: 62
Chameleon Install Pics, Please
« on: September 02, 2006, 07:40:00 AM »

Just got handed a Chameleon chip to install, and I cannot find a working guide or diagram... not here or at xodus.  Just a close up of the P/E diodes.

Any help out?  Preciate it.
Logged

mikearama

  • Archived User
  • Jr. Member
  • *
  • Posts: 62
Chameleon Install Pics, Please
« Reply #1 on: September 06, 2006, 05:28:00 AM »

No one has any chameleon install pics stored anywhere?  Sure could use the P/E points...
Thanks.
Logged

NYCXBOX

  • Archived User
  • Hero Member
  • *
  • Posts: 529
Chameleon Install Pics, Please
« Reply #2 on: December 16, 2006, 11:26:00 PM »

I don;t have a pic - but this helped me out - real easy to understand.

Alternate Method 1 to attach the Power and Eject lines to the Xbox under the MOBO

Use the pic below as a guide. (NO PIC SORRY) Locate the front panel wiring harness (a connector holding 9 yellow wires). You can see that Pin 1 is indicated by a small triangle on the motherboard.(top of the MOBO) Using Pin 1 as a reference point, Pin 2 (Power button line) is opposite Pin 1. Pin 4 (Eject button line) is next to Pin 2 (diagonal from Pin 1). NO FLIP IT OVER and SOlder to those pins.

Easy enough.
Logged