xboxscene.org forums

Author Topic: Unleashx Pal Output Issue (Baldur's Gate Dark Alliance)  (Read 1103 times)

fallenangle

  • Recovered User
  • Hero Member
  • *
  • Posts: 664
Unleashx Pal Output Issue (Baldur's Gate Dark Alliance)
« on: December 23, 2015, 05:51:00 PM »

Not sure if there is any help that can be given as I suspect this is a video encoder issue.

Logged

Giack93

  • Archived User
  • Newbie
  • *
  • Posts: 3
Unleashx Pal Output Issue (Baldur's Gate Dark Alliance)
« Reply #1 on: December 23, 2015, 06:35:00 PM »

First of all thanks for the fast reply :)

Logged

T2Steve

  • Archived User
  • Full Member
  • *
  • Posts: 215
Unleashx Pal Output Issue (Baldur's Gate Dark Alliance)
« Reply #2 on: December 24, 2015, 02:08:00 AM »

if you have backed up your EEPROM from each xbox, I would unlock the hard drive from the working xbox, and re-lock it with the eeprom from the not working box and see if it works suddenly once you have the new hard drive in. you can then unlock it and re-lock with the original eeprom.

Logged

Giack93

  • Archived User
  • Newbie
  • *
  • Posts: 3
Unleashx Pal Output Issue (Baldur's Gate Dark Alliance)
« Reply #3 on: December 24, 2015, 03:43:00 AM »

I think the problem is the different video encoder, on the first xbox (working) i have Xcalibur, and Focus on the second. I would not touch eeprom and hard drive unlocking cause i bricked the past Xbox doing this.
Logged

fallenangle

  • Recovered User
  • Hero Member
  • *
  • Posts: 664
Unleashx Pal Output Issue (Baldur's Gate Dark Alliance)
« Reply #4 on: December 24, 2015, 07:39:00 AM »

When using SCART (RGB) check the UnleashX Settings > Video Settings > Filter and Soften levels.

Logged

T2Steve

  • Archived User
  • Full Member
  • *
  • Posts: 215
Unleashx Pal Output Issue (Baldur's Gate Dark Alliance)
« Reply #5 on: December 24, 2015, 06:58:00 PM »

i don't think that it would come down to an encoder issue. I've never heard of it being overly problematic when trying to get HD out of the box.

Logged

T2Steve

  • Archived User
  • Full Member
  • *
  • Posts: 215
Unleashx Pal Output Issue (Baldur's Gate Dark Alliance)
« Reply #6 on: December 25, 2015, 03:23:00 AM »

Just ran across this article. Might be helpful

Logged

Giack93

  • Archived User
  • Newbie
  • *
  • Posts: 3
Unleashx Pal Output Issue (Baldur's Gate Dark Alliance)
« Reply #7 on: December 25, 2015, 09:46:00 AM »

Guys a little update, i've burned a frosty recovery disc. Now when i boot the disc at the boot in 576i 50hz, navigate to file manager, open evox.xbe to boot the SID menu, navigate through the file manager of the SID in the baldur's gate folder and launch it through the xbe the game starts correctly in 576i 50hz through component. While when i launch it through Unleashx in PAL 576i 50hz i got black screen as always (working only with rgb). 

Logged