Print

[Xboxmodderndure]

This is the story:
One day I softmodded my v1.0 Xbox with unleashx dash, unplugged the xbox and took it back to my room.
That same night, i installed Duke Nukem 3-D on the softmod, plugged it in error screen.
The next day, tried to hotswap and the xboxhdm cd-r was nicked (made a new one), failed to read while installing softmod, corrupted hdd.
I went into windows and using a fatx formatter, and xboxhdm said "No valid XBox Partition Table"
One year later, I tried the following options:
1 Build from scratch
2 Rebuild C:

The xbox flashes Red and Green LEDS, no Error code
Help


This post has been edited by Xboxmodderndure: Nov 3 2011, 02:07 AM

[Heimdall]

How did you softmod your Xbox originally?

Do you have a copy of the eeprom?

[Xboxmodderndure]

1: what do you mean?
2: no eeprom.bin backup, I never made a eeprom reader.

This post has been edited by Xboxmodderndure: Nov 3 2011, 03:04 AM

[Heimdall]

I mean how did you softmod your Xbox before you messed it up by installing Duke Nukem 3D......

You don't need an eeprom reader to take a backup of your eeprom, you use Evox or Config Magic or Xman954's eeprom dumper immediately after you've softmodded.

[Xboxmodderndure]

Hotswap
the xhoxhdm now says
cp: write error: no space left on device
how do you disable backing up c:
and I had it unplugged for about 10 minutes then i tried to play Duke Nukem 3-D

This post has been edited by Xboxmodderndure: Nov 3 2011, 03:20 AM

[Xboxmodderndure]

bump

[Xboxmodderndure]

Can I copy the hdd to a backup from a Xbox v1.6 then write the hdd image to the Xbox v1.0 HDD.
can I hotswap the V1.4 Xbox, I have tried:
Hotswap at MS Dash
Hotswap at the flubber amin

This post has been edited by Xboxmodderndure: Nov 4 2011, 08:14 PM