Topic: Did You Or Do You Plan To 'homebrew' (freeboot/xbreboot) Your (Read 2252 times)

Pseudo99 · « **Reply #30 on:** December 12, 2009, 11:34:00 PM »

You forgot to add the option:

"Yes I have several exploitable consoles but I haven't gotten around to doing it because they're RROD and failed all regular fixes short of a complete reflow and I haven't had time to purchase a reflow oven; I'm also too lazy to build a usb spi of my own so I ordered one from someone on the bst forum"

Put me down in that category.

FutabaGP · « **Reply #31 on:** December 13, 2009, 07:06:00 AM »

I own 3 xboxes now, 2 are not exploitable falcons, third a XBR'ed xenon. XBR good, xenon not good... waiting for 8xxx hack...

bidrug · « **Reply #32 on:** December 13, 2009, 11:31:00 PM »

QUOTE(Pseudo99 @ Dec 13 2009, 07:34 AM)

You forgot to add the option:

"Yes I have several exploitable consoles but I haven't gotten around to doing it because they're RROD and failed all regular fixes short of a complete reflow and I haven't had time to purchase a reflow oven; I'm also too lazy to build a usb spi of my own so I ordered one from someone on the bst forum"

Put me down in that category.

That's a kick on the nuts.... you should give it another try!

My first console was very very hardmoded (VGA, Component, composite, and all posibble A/V outs in the back, plenty of cooling, then I sold it and went Rrod in less than 2 weeks, returned to me...

I saw the fixes for rrod, and started buying used consoles with red lights for Christmas, two years latter, ended up with like 20 consoles in rrod, and fixed every single console.

Now I done a xbr into the first one, and these days will try freeboot.

It's great to see a full game in the hard drive without risking it, no more disk scratching to my disk, and much more luck for my nephews, just waiting till it gets much more stable to give it to them.

M0t0rPen1s · « **Reply #33 on:** December 14, 2009, 10:50:00 AM »

I have dashboard 8498 , can i use homebrew on my console or am i screwed ?

westcoastloc · « **Reply #34 on:** December 14, 2009, 10:10:00 PM »

I got a xbox live arcade jasper like a month and a half ago. can i use freeboot or xbereboot (im use xbox live so i probably have the newest dash) ? Do both of these mthods require soldering? I dont care too much about storing full games (way too much space) but I am interested in future emulators that would benefit/couldnt exist without the extra power of the 360 processor.

XmdawgX · « **Reply #35 on:** December 15, 2009, 02:00:00 AM »

QUOTE(westcoastloc @ Dec 15 2009, 12:10 AM)

I got a xbox live arcade jasper like a month and a half ago. can i use freeboot or xbereboot (im use xbox live so i probably have the newest dash) ? Do both of these mthods require soldering? I dont care too much about storing full games (way too much space) but I am interested in future emulators that would benefit/couldnt exist without the extra power of the 360 processor.

To answer all 3 of your questions... No, No, and Yes...

Next time read... it's been repeated more than enough times that the jtag exploit was fixed in summer 09.

You'll also be soldering no matter what if you want xbreboot or freeboot running.

Br0k3R · « **Reply #36 on:** December 15, 2009, 04:30:00 PM »

QUOTE(Br0k3R @ Dec 8 2009, 09:50 PM)

damn my xenon got banned and its 8955 ;/ already bought new jasper to play online

so no expoitable xbox'es left ;/

Yeaaaa my friend donated me a pre-NXE xenon and it has xbr installed now

Rustmonkey · « **Reply #37 on:** December 16, 2009, 12:14:00 PM »

Cmon guys - this requires less soldering than an old xbox 1 chip - really not complicated

Now... the PS2 chips... those were nasty

Modded my launch day 360 yesterday, tried out xexloader and will hopefully give mame360 a go sometime this week.

Awesome!

gaming fanboy · « **Reply #38 on:** December 19, 2009, 12:51:00 AM »

QUOTE(p3eps @ Dec 17 2009, 09:19 PM)

The topic is 'do you plan to homebrew'... but there is no option that says no!

that means you shouldn't vote. lol

imaphaggit · « **Reply #39 on:** December 19, 2009, 07:39:00 PM »

Can you do the 256/512mb ones yet? or am I just stupid?

lenselijertje · « **Reply #40 on:** December 20, 2009, 02:32:00 PM »

yes, also the 256/512mb nand are now possible.

xbreboot is just not stable enough at the moment.

I read freeboot is better but cygnos chip dont support big nand

Robo222 · « **Reply #41 on:** December 20, 2009, 03:32:00 PM »

I want to buy a very good modded freeboot/jtag xbox360 with LEDs and shit for less then 400

MetalRampage · « **Reply #42 on:** December 21, 2009, 09:00:00 AM »

I feel like such an idiot for updating my console

Also, I'm not really hopeful that a new bug will emerge anytime soon considering how long it took for the first one to pop up. Still there is hope.

elitegamer360 · « **Reply #43 on:** December 21, 2009, 02:30:00 PM »

QUOTE(LZ69 @ Dec 8 2009, 11:24 AM)

I'm willing to buy an already exploited one. I mean, I can mod the firmware easily, I'm not a newb, but the amount of effort required to make the JTAG hack work is just too challenging. So many things can go wrong, you have to solder parts and keep your fingers crossed that the kernel isn't patched already.

Let's hope an easier method comes about. Or the dream where you can pop in a USB stick and it exploits the console

+1

edwinmcdunlap · « **Reply #44 on:** December 23, 2009, 12:03:00 AM »

I'll probably get a pre-modded system in a few months.

Author Topic: Did You Or Do You Plan To 'homebrew' (freeboot/xbreboot) Your (Read 2252 times)