Topic: Team Xecuter Mysterious 'DemoN' and a Pin Header Cable (Read 263 times)

Xbox-Scene · « **on:** December 21, 2011, 09:48:00 PM »

Team Xecuter Mysterious 'DemoN' and a Pin Header Cable
Posted by XanTium | December 21 23:48 EST | News Category: Xbox360

From /team-xecuter.com:

Quote

While the others were fixing their glitch chip problems and releasing a bunch of revised versions, instead of doing it right first time like the Xecuter CoolRunner, we were making something else that is totally awesome and will take jtag/glitching to the next level.
Coming very soon

On a side note a lot of users have asked us to do a Pin Header cable set for the Nand-X and CoolRunner as the current Nand-X pin header set is popular with none QSB users so we designed that too. The first batches were shipped today to retailers.

Official Site: http://team-xecuter.com

UnrealEureca · « **Reply #1 on:** December 21, 2011, 11:05:00 PM »

How was the coolrunner done right the first time if they also needed the 25cm cable? which they shipped with the chip.

LLCCLL · « **Reply #2 on:** December 21, 2011, 11:21:00 PM »

Why is the emphasis on the emo?

Paperstack.1 · « **Reply #3 on:** December 22, 2011, 12:26:00 AM »

QUOTE(LLCCLL @ Dec 22 2011, 12:21 AM)

Why is the emphasis on the emo?

lol

thank you. now it can't be unseen.

ModchipCentral.com · « **Reply #4 on:** December 22, 2011, 12:39:00 AM »

Or maybe the emphasis is on D N?

Dual Nand?

Grim187 · « **Reply #5 on:** December 22, 2011, 01:58:00 AM »

QUOTE(LLCCLL @ Dec 21 2011, 10:21 PM)

Why is the emphasis on the emo?

because they went emo (?) and said

QUOTE( "xecuter")

While the others were fixing their glitch chip problems and releasing a bunch of revised versions, instead of doing it right first time like the Xecuter CoolRunner

then decided to do a dual nand (?) ...which most end users with a soldering iron and a extra nand can do.

one of the more difficult ways of doing a dual nand (aka nandwitch)

QUOTE( "ameel")

DemoN
DemoNand?
DualemoNand?
DualemulationNand?
DumbexpectationmerelyonNothingoriginal?

link to original quote

nuff said/

thorro · « **Reply #6 on:** December 22, 2011, 02:16:00 AM »

The right way, yeah, by releasing an addon wire spiral board. Sure it's the right way!

I'm installing Matrix chips, no problems so far.

cjackson · « **Reply #7 on:** December 22, 2011, 05:11:00 AM »

what is tihs useless cables for?

ichigoxxx · « **Reply #8 on:** December 22, 2011, 09:48:00 AM »

cool a revised coolrunner with a new name

BoNg420 · « **Reply #9 on:** December 22, 2011, 10:12:00 AM »

QUOTE(ichigoxxx @ Dec 22 2011, 11:48 AM)

cool a revised coolrunner with a new name

I seen somewhere that this isnt a replacement, but an addon.

itoktoeatfish · « **Reply #10 on:** December 22, 2011, 10:22:00 AM »

No No you guys have it wrong its going to be a huge no solder pcb

danthaman673 · « **Reply #11 on:** December 22, 2011, 11:38:00 AM »

Who cares, they cant even get the photos showing up in chrome properly (just placeholders) . Nice way of getting free publicity (hope someones getting paid well ;-) anyway.. whatever it is you can bet it was lifted, so I would start there......

ruciz · « **Reply #12 on:** December 22, 2011, 02:37:00 PM »

Im sure once someone speculates the right thing, TX will copy it and post the infos

Im thinking that this is an addon to their nandx anddon, like their coolrunner, but I figure its dual NAND emulation where it boots Xell and then from there loads homebrew where you can choose your 'xbl safe' boot, or you can choose your HDD loading/homebrew mode.

Xell don't care about LDV counts and always boots, its also 'freeware' and is why I think this would be their base.. Im sure its not hard to emulate a NAND

Dual EMulation Online Nand

every hack for the 360 focuses on the online aspect which the RGH kills.

brandogg · « **Reply #13 on:** December 22, 2011, 09:35:00 PM »

It's going to be like the LiteOn board clones, only it's going to be a full Xbox 360 motherboard clone, with RGH already programmed into it. MSRP about $900.

n01a · « **Reply #14 on:** December 23, 2011, 12:31:00 AM »

QUOTE(brandogg @ Dec 23 2011, 06:35 AM)

It's going to be like the LiteOn board clones, only it's going to be a full Xbox 360 motherboard clone, with RGH already programmed into it. MSRP about $900.

nailed !

...and components will start to fall off by themself like with the stupid coolrunner

Author Topic: Team Xecuter Mysterious 'DemoN' and a Pin Header Cable (Read 263 times)