Topic: Error Code 21 On Ms Dash After Resolution Change (Read 104 times)

ZWinFlame · « **on:** April 28, 2006, 08:31:00 AM »

I changed the resolution of the MS Dashboard yesterday to display HD 1080 lines and my Xbox froze and after reboot. I get the evox dash but when I start the MS Dash it gives the usual 'Error Code 21'. There are lots of posts on this error code but couldn't find one with a sound solution.

Ever since that I can't seem to even use the xbox media center. I'm using the HD AV Pack

I've tried putting the msdash files from the backup I have and same issue. As for my findings, when I start the xbox the flubber now starts in widescreen mode which I actually set it to.

Can someone please help out with a soultion. I believe if there is a software that changes the resolution. that would immensely help.

Reallly really appreciate your help.
** I have xecuter 2.3b pro installed with solder. Works well. Never had an issue with that.

krayzie · « **Reply #1 on:** April 28, 2006, 08:33:00 AM »

It might help if you start by saying what mod you have intalled

ZWinFlame · « **Reply #2 on:** April 28, 2006, 08:43:00 AM »

I have the xecuter 2.3b pro. Mod works well. No issues at that end. This just happened after changing the resolution.

ZWinFlame · « **Reply #3 on:** April 28, 2006, 10:50:00 AM »

Will a software like video select v2 work? Can someone please help.

Author Topic: Error Code 21 On Ms Dash After Resolution Change (Read 104 times)