Topic: Flashing Your X2lite With Ozxchip Method (Read 13106 times)

jfoust · « **Reply #330 on:** December 11, 2003, 11:05:00 AM »

Holy Crap you guys... My Xecuter 2.3 Lite + arrived not 2 hours ago, and I am already installed, flashed and doing.... um.... things with the newly modded Xbox! Thanks to everyone here, and especially thanks for this tutorial!

-J

TripFoeYa · « **Reply #331 on:** December 12, 2003, 08:54:00 PM »

I'm using RCA connectors and I still continue to get a blank screen. Any suggestions?

lee500 · « **Reply #332 on:** December 16, 2003, 06:40:00 AM »

I have a thomson dvd drive in my xbox do anyone know what dvd-r media it can read. I want to backup my games on to disc. Does cd-rs work too?

Thanx

heinrich · « **Reply #333 on:** December 16, 2003, 10:20:00 AM »

QUOTE (TripFoeYa @ Dec 13 2003, 12:54 AM)

I'm using RCA connectors and I still continue to get a blank screen. Any suggestions?

Reading pinned topics is cool.

QUOTE

Also, with a v1.4/1.5 xbox, cromwell does not support video output. The flashbios will still work fine, simply follow the same instructions.

If you have a 1.0-1.3 then check your solder points.

And btw, the x2.2 and x2.3 comes with the flashbios, you don't need ozxflash, so this is the wrong thread for most of your.

lee500 · « **Reply #334 on:** December 17, 2003, 08:08:00 AM »

QUOTE (tester123 @ Apr 21 2003, 03:35 PM)

Some people might still need help...bump

test,

I got the ozxflash and it encode and ask for the bios cd after I put that in it gives me errors and it does not program or erase like you see in the pictures. Can you send me some info to my email [email protected]

I thank you very much

aleefers · « **Reply #335 on:** December 22, 2003, 02:19:00 PM »

Will Punchy's original tutorial work on an Xecuter 2.3 lite?

lee500 · « **Reply #336 on:** December 23, 2003, 12:23:00 PM »

mxz440fan

where did you buy this mod chip. I bought one too and it is doing the same. Maybe it is from the same place.

duudfromnorway · « **Reply #337 on:** December 23, 2003, 04:22:00 PM »

Soo.... Would you recommend that i with my x2.3plus in "flash mode" try out your experiment??

lookformeb · « **Reply #338 on:** December 23, 2003, 09:54:00 PM »

Any chip with FlashBIOS doesn't need this method, as discussed many times before.

jcbuche · « **Reply #339 on:** December 25, 2003, 05:06:00 PM »

Any suggestions besides mIRC?

If someone could email them to me that would be great.

PM me and let me know.

tservo24 · « **Reply #340 on:** December 29, 2003, 06:31:00 PM »

I am having a similar problem as the previous poster (itzlilc). I have an XBox v1.5 and Xecuter 2.3 Lite+. I followed the directions in the very beginning of this tutorial exactly (for those with Cromwell and I hoped these directions would apply to my case...)

I used BIOS 4977 and a 100MB dummy file and a Memorex CD-RW at 4x (burned in Nero with all the correct settings). I flashed it (the drive seemed to read the media fine and the XBox shutdown)...and I hoped everything would work as advertised, but unforfunately it FRAGs everytime I boot with either Bank 1 or Bank 2. When I disable the mod, the Xbox works fine and boots normally.

Questions:
1) Is there anyway to rescue this modchip? Besides buying the adapter to essentially make this the Pro edition?

2) If I had only flashed with 512K instead of the recommended 1,024K would that have saved one of my Banks?

3) What SHOULD I have done? Which BIOS should I have used??? Is there anywhere else something could have possibly gone wrong? My gut feeling is that the mod is installed correctly but I just picked the wrong BIOS version...

Please respond, if possible, with step-by-step instructions for a newb such as myself.

tservo24 · « **Reply #341 on:** December 29, 2003, 06:47:00 PM »

Author Topic: Flashing Your X2lite With Ozxchip Method (Read 13106 times)