So I'm trying to flash my new 360 with the ms28. I used Iprep with ixtreme12 to create a bootable usb thumb drive. Everything is ok... I had it configured to use my Via 6421 card... So I go through the steps.. everything boots up fine.. run Idump 1234567 12345 (just throwing numbers out) it finds the 360 drive... I turn it off.. wait for 10 seconds. turn it on.. and it picks it up and just sits there saying READING: .. 00 or sometimes if i'm lucky I get 01%
I have left it there for 15-20 mins without any change. I tried 10 seconds. 2 seconds, 8 seconds.. I tried a lot. I don't know what the problem could be.... if it's doing that.. does that mean my timing is off? I also tried a floppy just in case it was the usb stick.. and currently on two different computers.. same results.
I have tried the other slot on the sata card, of course that won't read it at all. I'm just confused and would like to know what that usually means.. and what could solve it. Thanks in advance.
Author
Topic: Help With Ms28 Flash... Idump Freezes At 00% (Read 40 times)