Print

[Adamq]

Hi i just got a JPN ver xbox 360 and it came with some wierd HD AV cable and i have no input for it on my plasma so i was looking for any info to see if i can cut the HD AV plug off (also known as a d terminal plug i think) and wiring up a rgb terminal (d-sub 15 pin connecter) so i can get some good resolution out of  it. Any info would be a great help thanx (IMG:style_emoticons/default/smile.gif)

[ze_olc]

i believe adpaters dont exist. there is some stuff gamecube though...
yes, there is probably a way to solder the wires and make a vga out of the d terminal cable. is d terminal just a different vga type? been loking for that info as well.

[Adamq]

QUOTE(ze_olc @ Dec 22 2005, 11:49 AM)

i believe adpaters dont exist. there is some stuff gamecube though...
yes, there is probably a way to solder the wires and make a vga out of the d terminal cable. is d terminal just a different vga type? been loking for that info as well.

yes from what little info i have found the d term is just another type of vga connection my problem is what wire goes where.It has 3 thick wires pink blue and green and the other wires are thin black orange and pink there is also a black wire that loops back to a pin next to it  (IMG:style_emoticons/default/uhh.gif)

[Adamq]

It works i found a diagram at http://www.gamesx.com/avpinouts/jdcon.htm for a Japanese D connecter and wired it to a 15 pin monitor plug  total cost to do this mod was $4.50  (IMG:style_emoticons/default/biggrin.gif)

This post has been edited by Adamq: Dec 22 2005, 06:15 PM

[ze_olc]

confirmed working?
very interesting. indeed, there was something about gamecube...

[Adamq]

Yes 100% working and easy to do I got that link from a gamecube site it was one of the only diagrams i could find for a Japanese D Connector and the diagram for a 15 pin plug was in my instruction manual for my plasma.And i still have my av plugs for the old  tv's   if

[theboyfromthemoon]

1 Y
2 Y GND
3 Pb
4 Pb GND
5 Pr
6 PR GND
7 Reserved
8 Line 1
9 Line 2
10 Reserved
11 Line 3
12 GND
13 Reserved
14 Plug In Flag

Can you tell me where to connect the wires from the D-terminal connector to the vga connector, something like this:

D-term:pin1Y------------VGA-pinx

Thanks

[Adamq]

Hi theboyfromthemoon

RGB terminal (D-Sub 15-pin connector)

pin-1 R(Pr/Cr)
pin-2 G or sync on green (y)
pin-3 B (Pb/Cb)
pin-4 No Connection
pin-5 No Connection
pin-6 R GND (Pr/Cr GND)
pin-7 G GND (Y GND)
pin-8 B GND (Pb/Cb GND)
pin-9 No Connection
pin-10 GND
pin-11 No Connection
pin-12 [SDA]
pin-13 H SYNC or H/V composite sync
pin-14 V sync [V.CLK]
pin-15 [SCL]

Hope this helps if you get stuck let me know and i will take a pic of the plug so you can see how it's wired up

This post has been edited by Adamq: Dec 24 2005, 02:55 PM

[ze_olc]

This is worth a tutorial...

[Adamq]

QUOTE(ze_olc @ Dec 25 2005, 09:20 AM)

This is worth a tutorial...

Yes i think so i will take some pics of the plug tonight and post them

[theboyfromthemoon]

My monitor its a sync on green compatible, so I think to solder only the Red, Blue, Green. Right ?

[Manya]

QUOTE(Adamq @ Dec 25 2005, 12:00 AM)

Hi theboyfromthemoon

RGB terminal (D-Sub 15-pin connector)

pin-1 R(Pr/Cr)
pin-2 G or sync on green (y)
pin-3 B (Pb/Cb)
pin-4 No Connection
pin-5 No Connection
pin-6 R GND (Pr/Cr GND)
pin-7 G GND (Y GND)
pin-8 B GND (Pb/Cb GND)
pin-9 No Connection
pin-10 GND
pin-11 No Connection
pin-12 [SDA]
pin-13 H SYNC or H/V composite sync
pin-14 V sync [V.CLK]
pin-15 [SCL]

Hope this helps if you get stuck let me know and i will take a pic of the plug so you can see how it's wired up

so, do I need to make extra wires from the xbox conector, or do I just use the 6 wires already there?

[skypainter]

QUOTE(Manya @ Dec 29 2005, 03:59 AM)

so, do I need to make extra wires from the xbox conector, or do I just use the 6 wires already there?

Hi,

How should I connect the pin 8 ( Line 1 ) , pin 9 ( line 2) and pin 11 ( line 3 ) of the d-terminal to a VGA connector ? Are they suppose connect to pin 13, 14 and 15 for the VGA connector ?

[theboyfromthemoon]

I believe Adam is out skying...no time to write a tutorial ...

[Adamq]

QUOTE(Manya @ Dec 28 2005, 08:59 PM)

so, do I need to make extra wires from the xbox conector, or do I just use the 6 wires already there?

Yes you need 4 bits of wire approx 35mm long they are the GND wires and i will post a step by step tut soon but im having too much fun with CoD 2 running in hd  (IMG:style_emoticons/default/biggrin.gif)