xbox-scene.com archived forum

Xbox1 Forums => Modchip Forums => Team SpiderGX (SpiderGX, SpiderChip) => Topic started by: mallow23 on December 21, 2007, 06:02:20 PM

Title: Spider Chip V1.1 Xbox V1.6
Post by: mallow23 on December 21, 2007, 06:02:20 PM

Hey,
Whats the best way to remove the lacquer from the wire holes? I have been trying to use a sewing needle but it  doesn't seem small enough and keeps sliding around. I am afraid I am gonna scratch up the board. Well thanks in advance for replies.
Jordan




Title: Spider Chip V1.1 Xbox V1.6
Post by: MasterLocDown on July 10, 2008, 04:16:55 PM

i just use an exacto knife and scrape a little off other than that i have nothing else for you




Title: Spider Chip V1.1 Xbox V1.6
Post by: Alex548 on July 10, 2008, 04:50:17 PM

Fiberglass pen




Edited by Alex548, 11 July 2008 - 12:51 AM.


Title: Spider Chip V1.1 Xbox V1.6
Post by: erosy666 on January 09, 2011, 09:59:21 AM


If that still doesn't work, you could do a HD flash. If you have a friends chipped Xbox, unlock your hard drive using the spiderchip menu. Now remove your hard drive and put it in your friends Xbox and copy the BIOS you want to flash into the C:/BIOS folder. Then put your hard drive back in your xbox and lock it again and then choose Load BIOS from Hard Drive and flash it.
=============
neon sign (http://store.everything-neon.com/)
search engine optimisation techniques (http://www.seomediasite.com/)





Title: Spider Chip V1.1 Xbox V1.6
Post by: HackDaBox on April 30, 2011, 10:53:38 PM

Please forget the bloody Spider chip and softmod instead !