xboxscene.org forums

OG Xbox Forums => Hardware Forums => General Hardware/Technical Chat => Topic started by: T2Steve on April 10, 2015, 02:27:00 AM

Title: Xbox Original
Post by: T2Steve on April 10, 2015, 02:27:00 AM

what's the problem?

Title: Xbox Original
Post by: gazcan on April 10, 2015, 04:17:00 AM

bought a second hand xbox which had a sticky dvd tray. so I went to open up the xbox. long story short I found that it had a modchip soldered to the board a DUOX2 FUJITSU. turn on the console with power button the console wont boot up gives the flashing red/green circle. when I press the eject button the console boots up. disconnect the chip the console boots up.

Title: Xbox Original
Post by: T2Steve on April 11, 2015, 01:27:00 AM

when you boot with the eject button I am guessing it is booting in an un-modded state? 

Title: Xbox Original
Post by: gazcan on April 11, 2015, 07:56:00 AM

its got a switch on it and a red flashing light lol. other than that I not got a clue what you are on about lol

Title: Xbox Original
Post by: QQ_ghost on April 11, 2015, 09:31:00 AM

The mod-chip might just be blank, or it could be a bad flash.

Title: Xbox Original
Post by: T2Steve on April 14, 2015, 10:00:00 AM

Gazcan, i recommend going through the help docs on XS to learn more about TSOP, hot swap, hot swapping a chip, original software, and modded/softmodded.