xboxscene.org forums

Author Topic: No Audio/video/eject  (Read 36 times)

Pooky

  • Archived User
  • Jr. Member
  • *
  • Posts: 68
No Audio/video/eject
« on: January 20, 2004, 02:07:00 PM »

I was preparing a xbox for flashing the tsop. I soldered the jumpers and the wires for the switch (not yet connected)

But now when i boot the xbox i don't get any video or audio and the dvd-tray won't eject. The led is solid green.

When i push the eject button the led is blinking and the dvd is searching. After that the xbox reboots. The led is blinking and after a while it's solid again. But still no video or audio and the tray still won't open.

I realy checked the mobo for solder but couldn't find anything. Is there an other thing that can cause such a problem.

Hope anyone can help me out

ps: i haven't flashed the tsop yet
Logged

Pooky

  • Archived User
  • Jr. Member
  • *
  • Posts: 68
No Audio/video/eject
« Reply #1 on: January 21, 2004, 05:00:00 AM »

i found this realy strange thing.

When i remove the solder of the bottom flash enable jumpers the xbox boots normal. The solder on the top jumper is still there. But when i solder the bottom jumpers i have no audio, video or eject.

can somebody tell me what is going on here.
Logged