frescoelamante688 some people, like me, have fan windows
.
TheRaptorPilot69 let me make sure I'm understanding you correctly, you want to put a cold cathode underneith your jewel (99.9% sure on this) cool np, but you also want to replace the stock fan with a 80mm fan AND have 12v running to it (12 volt fan mod, 66.6% sure of this), and your problem would be, both of these mods use the HDD for power. Well your CC (as well as your fan maybe) should come with a splitter type deal that allows your to get power to the CC and the HDD. So use this for your Cold Cathode BUT for your 80mm fan I have a nice (rarely used) solution. XBTool my friend. You may ask what does XBTool have to do with my fan? (if you don't know what XBTool is check in the BIOS section of tools, for your PC, on X-S) Well here is your answer with this nifty BIOS editing tool you can adjust the volts going to your fan via the power connector the stock fan uses. Just set the fan speed setting on the far left near the bottom to 100 percent then flash your xbox with the bios and your set my friend.
(I know this is just one solution of many so.... ya) <