archived forum

Please login or register.

Login with username, password and session length
Advanced search  

News: forum restored.  registration disabled.  thanks to xboxexpert for the db dump and netham45 for cleaning it up!

Author Topic: Dual Nand Falcon Problem  (Read 64 times)


  • Guest
Dual Nand Falcon Problem
« on: November 21, 2012, 12:35:04 PM »

hi all. I'm installing a second nand to my falcon but I have a problem.
On nand native I still have the old freeboot (with 360squirt RGH1 that should be no problem since the switch is manual) but before you have nothing I want to be sure that with the addition nand there are no problems. But here's the problem: I run writing Xell (the old original nand) on the new nand (via lpt cable) without any error. But if I go to the switcharing nand (via manual switch) the xbox will not start. I also tried to start before the nand primary and then the secondary fan but the result is maximum and no glitch. Now I have on native nand nand freeboot and secondary Xell. What am I doing wrong? how can I check the correct connection of the secondary nand? thanks

Edited by fabiosuper14, 21 November 2012 - 09:41 PM.


Page created in 0.054 seconds with 15 queries.