xbox-scene.com archived forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

xbox-scene.com forum restored.  registration disabled.  thanks to xboxexpert for the db dump and netham45 for cleaning it up!

Pages: 1 [2]

Author Topic: Duox2 Bios On Bank 0 Messed Up And Bank 1 Empty  (Read 325 times)

shambles1980

  • Guest
Duox2 Bios On Bank 0 Messed Up And Bank 1 Empty
« Reply #15 on: May 13, 2012, 10:25:33 AM »


are you booting from a working chip or from the softmod?
if your booting from a softmod you need to put the chip on the lpc header before you can flash it..
I would personaly do that when i see that its starting to boot the softmod bios should have been loaded to memory by then. The chip has to be connected fully so its probably best to have d0 connected and bt connected to ground on the chip so its always on. then when the xbox starts to boot properly attach the chip to the lps header,
then just flash as norma. (with the correct 1.6 bios)




Logged

bentheman

  • Guest
Duox2 Bios On Bank 0 Messed Up And Bank 1 Empty
« Reply #16 on: May 13, 2012, 05:54:52 PM »


i press eject=softmod boot
i press power=chip boot





Logged

bentheman

  • Guest
Duox2 Bios On Bank 0 Messed Up And Bank 1 Empty
« Reply #17 on: May 13, 2012, 11:20:21 PM »


i get what ur sayin now take chip off header to boot soft mod once in softmod connect chip back on soo i dont boot the bad chip bios i think i get it now

thanks man




Edited by bentheman, 14 May 2012 - 07:22 AM.


Logged

shambles1980

  • Guest
Duox2 Bios On Bank 0 Messed Up And Bank 1 Empty
« Reply #18 on: May 14, 2012, 06:25:24 AM »


your bt point must be straped to a smd resister or to the back of the power buttoon for you to dual boot like that.
So you may want to strap bt to ground or pin 1 on the quick soler points on the chip.
(i think its pin 1, souble check that)
then the chip is always on and not dependant on a bt signal from a diferent button press.




Logged
Pages: 1 [2]
 

Page created in 0.185 seconds with 15 queries.