xbox-scene.com archived forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

xbox-scene.com forum restored.  registration disabled.  thanks to xboxexpert for the db dump and netham45 for cleaning it up!

Author Topic: Problem With Component Output  (Read 163 times)

MrMajst3r

  • Guest
Problem With Component Output
« on: April 03, 2012, 11:22:05 AM »


I have problem with component output. I have mounted it in 4 consoles and works great.
For couple days, I'm trying to do it in 1.2 console. But there are fuzzy lines on the screen.
I changed connectors, I solder thicker wires, and no effect. Screen is a piece of sh...
This interferences come from the Y signal.
Any ideas?




Edited by MrMajst3r, 03 April 2012 - 07:26 PM.


Logged

MrMajst3r

  • Guest
Problem With Component Output
« Reply #1 on: April 15, 2012, 12:59:53 PM »


I find a solution. I put back the metal case, and solder additional thick wire to GND.

But on another console I have different problem. I can see dots on a screen...




Logged

MrMajst3r

  • Guest
Problem With Component Output
« Reply #2 on: May 02, 2012, 04:25:57 PM »


I changed wires and connectors, and dots disappeared.




Logged
 

Page created in 0.105 seconds with 15 queries.