xbox-scene.com archived forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

xbox-scene.com forum restored.  registration disabled.  thanks to xboxexpert for the db dump and netham45 for cleaning it up!

Author Topic: Amazemod V2 Wiring Pls  (Read 319 times)

BytePir8

  • Guest
Amazemod V2 Wiring Pls
« on: March 19, 2012, 11:11:35 AM »


Hi all
can anyone point me to the wiring diagrams for the amazemod v2, looking @ putting it in a jasper sb? pls
seems hard to find diagram/pin out for this glitcher

cheers
Byte

Got it guys  lol amaze me  lol




Edited by BytePir8, 19 March 2012 - 07:31 PM.


Logged

Definitely Wapner

  • Guest
Amazemod V2 Wiring Pls
« Reply #1 on: March 19, 2012, 04:43:54 PM »


Google works wonders...

http://www.amazemod.com/




Logged

Jumpy_Beans

  • Guest
Amazemod V2 Wiring Pls
« Reply #2 on: March 19, 2012, 04:52:21 PM »


Wow, I didn't even know this glitcher existed, just looked it up and it seems like you don't have to program it and it's cheaper than most out there. Especially if you need to move it from console to console.




Logged

BytePir8

  • Guest
Amazemod V2 Wiring Pls
« Reply #3 on: March 29, 2012, 12:08:49 PM »


Wow, I didn't even know this glitcher existed, just looked it up and it seems like you don't have to program it and it's cheaper than most out there. Especially if you need to move it from console to console.


I wouldn't bother, have installed it in a jasper and trinity, it never glitched once!!
Not being able to program it you can't alter/reflash the bloody thing.
this glitcher in 1 word ,  SH*TE




Logged

jeffrey1790

  • Guest
Amazemod V2 Wiring Pls
« Reply #4 on: March 30, 2012, 09:59:02 AM »


you know its bad when they cant even spell the word glitcher

http://www.amazemod....ages/banner.jpg





Logged

Jumpy_Beans

  • Guest
Amazemod V2 Wiring Pls
« Reply #5 on: April 02, 2012, 02:35:51 PM »


I wouldn't bother, have installed it in a jasper and trinity, it never glitched once!!
Not being able to program it you can't alter/reflash the bloody thing.
this glitcher in 1 word ,  SH*TE


you know its bad when they cant even spell the word glitcher

http://www.amazemod....ages/banner.jpg

Lol thanks for the heads up! They also can't spell the word 'fat'.




Logged

relaxxx

  • Guest
Amazemod V2 Wiring Pls
« Reply #6 on: June 01, 2012, 09:45:00 AM »


Being the thrifty guy I am, I couldn't resist trying a $10 5in1 cheapo glitch chip. I just got one so far and it worked in both my Trinity and Jasper board. Glitching on Jasper was much faster than the Trinity but for $10 bucks this thing does the job. I'ts possible to get a few duds I'm sure. I ordered 3 more to try.




Logged

relaxxx

  • Guest
Amazemod V2 Wiring Pls
« Reply #7 on: June 09, 2012, 11:04:45 AM »


I got another one, not glitching slim trinity. I guess the first one was a fluke. These will glitch Jaspers very nicely but there is an issue with slims. Seems one of the capacitors needs to be changed. I'll be playing around with it to see if I can get it glitching.

http://www.consoleop...im-console.html





Logged

relaxxx

  • Guest
Amazemod V2 Wiring Pls
« Reply #8 on: June 13, 2012, 04:22:36 PM »


Good success today. I got another trinity working with this amazemod, top coil wiring like the picture in the link above. I was going to test some caps but my meter is broken. Using original SMD cap but it's now wired on little 1cm legs to pad A and GND. I started with about 45-50cm wire, no glitch, cut about 5cm off and glitched right away. Now with the DVD and HD installed I'm consistently getting boots within 5-15 seconds.

I gotta say, I'm liking this chip, trinity's are a little fussy but on Jaspers they're booting nearly instantly, almost all the time. I had an X360glitch chip on a jasper that was absolutely terrible, replaced it with amazemod and no problems at all. The LED is handy too. I was going to try a falcon but I have to wait till I get some more.




Edited by relaxxx, 14 June 2012 - 12:23 AM.


Logged

ellena

  • Guest
Amazemod V2 Wiring Pls
« Reply #9 on: July 28, 2012, 09:11:53 AM »


... Using original SMD cap but it's now wired on little 1cm legs to pad A and GND...

Can you explain a little more on that part about the SMD cap?  Do you mean you remove a SMD cap and wired it between pad A & GND?  Which SMD cap?

Have you tested more Amazemod on Slim?  Price is very attractive.




Edited by ellena, 28 July 2012 - 05:12 PM.


Logged

relaxxx

  • Guest
Amazemod V2 Wiring Pls
« Reply #10 on: August 07, 2012, 07:56:13 PM »


See link above, scroll down to pic.
I do not recommend Amazemod on Slim. Works fine on Falcon and Jasper but too many issues with Slim. I've gotten it to work but too much fiddling around to be worthwhile, DX had CR rev B's for $3 more.




Logged

relaxxx

  • Guest
Amazemod V2 Wiring Pls
« Reply #11 on: August 08, 2012, 06:52:18 AM »


Forgot to mention, the last trinity I booted Amazemod with, I had to use 440pf (2X 220pf in parallel). The wire lengths and cap values needed seem to be all over the place for booting slims.




Logged
 

Page created in 0.125 seconds with 15 queries.