xbox-scene.com archived forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

xbox-scene.com forum restored.  registration disabled.  thanks to xboxexpert for the db dump and netham45 for cleaning it up!

Pages: 1 2 3 [4] 5 6 ... 8

Author Topic: Gpu Reball Service & Other Rrod Repair  (Read 2404 times)

'wilgo45'

  • Guest
NULL
« Reply #45 on: July 11, 2013, 12:39:47 AM »

'
               Failed on a repair for dopesun

This was either the 3rd or 4th reball I had done for him.  Different consoles.

He sent me videos demonstrating some power glitches.  Figure it might be some Power Regs or other transistors.  When the consoles arrives to me - No glitches.

After looking over the motherboard, found missing SMT and curve to the Mobo and Gpu.
Setup a mild heat treatment to straighten out the board - using just underside heating.

After that, the console displayed an E74.  So, started in on a reball.  Reball did not correct.  Did the process again  .... still no.

Upon removing the original Gpu a third time; the power core started a collapse on the bottom chip layer.

So  .... an appropriate Gpu replacement was bought and installed.  Console still came back with RROD.  Pulled and reballed the replacement Gpu .... Still RROD after that.

Moral of the story ?  ... there is none
               
               

               
            '
Logged

'wilgo45'

  • Guest
NULL
« Reply #46 on: July 22, 2013, 04:20:14 AM »

'
               Successful Reball done for a friend of juvix8888

Falcon console that came in with an E74

All better now
               
               

               
            '
Logged

'wilgo45'

  • Guest
NULL
« Reply #47 on: September 04, 2013, 02:37:53 PM »

'
               Repair work was done for prb

This time, not a 360 console at all.  But an Apple iMac.

prb sent me the Graphics Card to work on.  I reballed the Processor chip with fresh Leaded spheres.  Chip is an Nvidia 7600 GT.

prb reports that the work was successful.
               
               

               
            '
Logged

'thr4773r'

  • Guest
NULL
« Reply #48 on: October 26, 2013, 10:34:41 PM »

'
               I want to add myself as a satisfied customer and reiterate comments made by others. Wilgo repaired my xenon for me at a reasonable price. I needed a reball for a video problem and came to him with the issue. The repair was quick, and I was informed the entire time.
He took the time to find out exactly what was going on and solved the problem, along with cleaning up some of my rushed soldering.
Thanks again, updated to the latest dash using j-runner, and all is well.

Shipping was reasonable as well.


               
               

               
            '
Logged

wilgo45

  • Guest
Gpu Reball Service & Other Rrod Repair
« Reply #49 on: January 14, 2012, 02:38:35 PM »


Hello

Offering Reball or Chip Re-pinning to those who need it.

Can do a Reball to the various Chips on the Phat 360: GPU, CPU, HANA, Southbridge and RAM.  Using Leaded spheres.

As for the Slim: if the stencils carry over for the same design - then we are good to go.

Common chips that need Reballing are usually the GPU and sometimes the Southbridge

So - if you are interested or curious please send me a personal message or reply post.  I usually come to this message board site daily.  Let me know in detail the problem your 360 is experiencing.

Can handle a few other RROD issues like the 0001 and 0002.  Also can replace certain parts of the DVD drive.

360 consoles will most likely have to be mailed to me.  I live near Des Moines in the state of Iowa.  Usually I can send a bubble wrapped 360 thru Postal Priority for 10.95

So - contact me for questions or to get the process started.




Logged

wilgo45

  • Guest
Gpu Reball Service & Other Rrod Repair
« Reply #50 on: January 18, 2012, 08:20:49 PM »


just adding a comment line to send this posting back to the starting page




Logged

wilgo45

  • Guest
Gpu Reball Service & Other Rrod Repair
« Reply #51 on: January 23, 2012, 12:13:42 AM »


bump bump




Logged

effbee05

  • Guest
Gpu Reball Service & Other Rrod Repair
« Reply #52 on: January 29, 2012, 06:41:16 AM »


What are your prices? I have one Jtag Zephyr that needs the GPU replaced (it's warped) and another Zephyr that probably just needs reballing.




Logged

wilgo45

  • Guest
Gpu Reball Service & Other Rrod Repair
« Reply #53 on: January 31, 2012, 01:43:40 AM »


United States Postal has just raised their rates

Medium Flat Rate Priority was 10.95   -  now 11.35

Best way to ship 360s for the price and the speed.

Entire console fits in the box, even with bubble wrap




Logged

youngD765

  • Guest
Gpu Reball Service & Other Rrod Repair
« Reply #54 on: February 01, 2012, 02:12:17 PM »


PM'ed




Logged

wilgo45

  • Guest
Gpu Reball Service & Other Rrod Repair
« Reply #55 on: February 04, 2012, 01:15:37 AM »



members of Xbox scene that I have recently helped:

albcool  -  GPU reball - has his 360 back in his possession

juvix8888  -  beat a 0002 for him on one job  &  on the second one: resolved a No Power with sub component replacement, plus the HANA was reballed to correct a E74


Three more people from Xbox Scene are sending their consoles to me.  Let you know the results when those are done.




Logged

wilgo45

  • Guest
Gpu Reball Service & Other Rrod Repair
« Reply #56 on: February 10, 2012, 02:12:19 PM »


time for another bump




Logged

wilgo45

  • Guest
Gpu Reball Service & Other Rrod Repair
« Reply #57 on: March 13, 2012, 03:25:02 PM »


hey - offering details on some more Xbox 360 repair jobs

These are Xbox scene members that I have helped

DeVante -  needed a GPU Reball for his jtagged system  - Completed

effbee05  -  also needed a GPU reball  - plus a reflow was done to the CPU   -  Completed

albcool -  another GPU reball  - job was completed  - But issues with a Nand flash are now giving the system and E79  -  I DID NOT DO the NAND FLASH  - that was prior to my work


youngD765   -  needed a GPU reball  -  sadly, job couldn't be completed ...  the CPU chip was fried


Currently doing a project for ShadowGuy  ... he wants more RAM installed to his Jasper board




Logged

effbee05

  • Guest
Gpu Reball Service & Other Rrod Repair
« Reply #58 on: March 16, 2012, 05:20:39 PM »


My old Zephyr is working fine! Thanks!




Logged

ksuhumpy

  • Guest
Gpu Reball Service & Other Rrod Repair
« Reply #59 on: March 18, 2012, 07:12:51 PM »


Console should ship tomorrow. Looking forward to getting an old Xenon JTAG working again.




Logged
Pages: 1 2 3 [4] 5 6 ... 8
 

Page created in 0.115 seconds with 15 queries.