xbox-scene.com archived forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

xbox-scene.com forum restored.  registration disabled.  thanks to xboxexpert for the db dump and netham45 for cleaning it up!

Author Topic: Chameleon Install On A 1.6 - Clear Instructions  (Read 231 times)

gixie

  • Guest
Chameleon Install On A 1.6 - Clear Instructions
« on: June 19, 2011, 09:06:53 PM »


Ok, so I had some chameleon chips and a couple of 1.6 boxes...
I've been looking for a clear guide all over these forums and, well, none were clear enough for me...
Here's what you do:
-Install the pinheader but remove pin 3 in addition to pin 4.
-Re-build the LPC
-Cut the Lframe and solder a wire to any ground pad (I soldered mine to the pad under the closest screw)
-Install your Chameleon that you previously flashed with evox.m8.v16.fc.137.bin (this worked for me, if I am wrong and the plus version works too, I apologize; I did not have time to experiment)
-Enjoy

If anyone wants pics of my install, I would gladly provide them.





Logged

gixie

  • Guest
Chameleon Install On A 1.6 - Clear Instructions
« Reply #1 on: June 22, 2011, 08:08:06 AM »


I actually went ahead and made a tutorial with pics in PDF format.
http://www.mediafire.....Xbox v1.6.pdf
Tutorial
Enjoy




Logged
 

Page created in 0.604 seconds with 18 queries.