xbox-scene.com archived forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

xbox-scene.com forum restored.  registration disabled.  thanks to xboxexpert for the db dump and netham45 for cleaning it up!

Pages: [1] 2 3 ... 8

Author Topic: Fbbuild 0.1 (2.0.12611.0)  (Read 1479 times)

DARKFiB3R

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« on: November 11, 2010, 08:43:24 AM »


fbBuild 0.1
===========

Introduction:
=============
   Sad to hear the rumor of ikari stepping down, and even sadder to hear
   of the profiteers taking advantage of this... we bring you a tribute
   to ikari. If you paid for this, get a refund!
   
   fbBuild is a NAND image builder made to suit freeBoot style images,
   the included patches and freboot.bin core are based on the original
   works done by ikari.
   
   It is suitable to build rebooter images for all current JTAG exploit
   compatible xbox 360's. As with ibuild produced images, this version
   only requires a single flash 16MiB in size or larger.

What's New:
===========
   - based on targeting kernel 2.0.12611.0
   - patches from freeBoot kernel/hv are ported to 12611
   - supports both flash tool and ibuild extracted kv/smc_config
   - supports injecting Mobile*.dat
   - previously revoked usb devices should now work
   - kinect works (apply system update for avatars and kinect)
       it is strongly recommended that r6t3 be removed
   - entirely new image builder (no extraction)
   - rebuilt/cleaned core can now boot xell on slot to eject dvd drives
       (see bin directory for alternate)
   - exploit payload simplified

Source xbins.org




Edited by DARKFiB3R, 11 November 2010 - 05:44 PM.


Logged

Package

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« Reply #1 on: November 11, 2010, 09:48:04 AM »


Tested and its working 100%

IPB Image
IPB Image




Logged

ckw0n

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« Reply #2 on: November 11, 2010, 10:27:12 AM »


ok, My r6t3 has been removed, but the points have been bridged to update to 9199. Do i need to leave them bridged to update to this, or should I unbridge them? I don't want to ruin my only jtag. Please folks! I would appreciate it.

MANY, MANY THANKS!




Logged

Emu9x

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« Reply #3 on: November 11, 2010, 10:30:36 AM »


Remove the bridge if system is jtagged.




Edited by Emu9x, 11 November 2010 - 07:36 PM.


Logged

eriksson25

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« Reply #4 on: November 11, 2010, 10:34:57 AM »


Anyone that can confirm, dashlanch works as it shuld with this relese? And freestyledash?

And is it needed to apply the whole 1261 update afterwords to gain kinect and avatars functinality?

Not home at the moment so cant test this out on mine.




Logged

Dazz

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« Reply #5 on: November 11, 2010, 10:36:37 AM »


Anyone have a tutorial for doing this?  I bought my system as a JTAG, but I have all the necessary keys and the NAND.  I haven't had to re-flash, so I'm not sure where to begin.  I'm debating on removing r6t3, but right now it's still connected.




Logged

ckw0n

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« Reply #6 on: November 11, 2010, 10:39:50 AM »


Yea, I too am a little nervous about the whole update, I don't want to loose the jtag because I want to be able to use my kinect on it. Obviously thats the whole point of it, but a tutorial would be great. I guess I'll wait a bit just to be sure...




Edited by ckw0n, 11 November 2010 - 07:41 PM.


Logged

eriksson25

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« Reply #7 on: November 11, 2010, 10:40:17 AM »


Anyone have a tutorial for doing this?  I bought my system as a JTAG, but I have all the necessary keys and the NAND.  I haven't had to re-flash, so I'm not sure where to begin.  I'm debating on removing r6t3, but right now it's still connected.


Always remove, or use the alternative way!




Logged

thedark1

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« Reply #8 on: November 11, 2010, 10:46:29 AM »


Thank you Baby Jesus.


Thx for the heads up too tongue.gif




Logged

Tatsh

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« Reply #9 on: November 11, 2010, 10:46:46 AM »


Can you run Freeboot with the .bin file you make and it will flash?




Logged

k0mpresd

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« Reply #10 on: November 11, 2010, 10:47:38 AM »


worked perfect on my jasper256. thanks!




Logged

eriksson25

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« Reply #11 on: November 11, 2010, 10:49:11 AM »


worked perfect on my jasper256. thanks!



Tested fsd, dashlaunche, avatar and kinect?




Logged

immyh

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« Reply #12 on: November 11, 2010, 10:49:39 AM »


Hi whats the alternative way? as i am really not skilled enough to remove r6t3 will this work if you dont remove it?




Logged

ckw0n

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« Reply #13 on: November 11, 2010, 10:50:54 AM »


Yes, if people can list what is, and isn't working, that would be great.




Logged

eriksson25

  • Guest
Fbbuild 0.1 (2.0.12611.0)
« Reply #14 on: November 11, 2010, 10:54:36 AM »


Hi whats the alternative way? as i am really not skilled enough to remove r6t3 will this work if you dont remove it?


Its two small solder points beside it. But you have to create a solder bridge betwen them, so if you cant then you have two options. Hand the job over to someone that can, or hope you have luck. If you have latest hacked dashboard then it shuldent be a problem aplaying updates, but nothing is 100% so I strongly recomend that you find somone that can do it for you.




Logged
Pages: [1] 2 3 ... 8
 

Page created in 0.109 seconds with 15 queries.