xbox-scene.com archived forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

xbox-scene.com forum restored.  registration disabled.  thanks to xboxexpert for the db dump and netham45 for cleaning it up!

Author Topic: Soldered A Spiderchip 1.1  (Read 126 times)

ishada

  • Guest
Soldered A Spiderchip 1.1
« on: July 03, 2007, 02:46:14 AM »


I soldered my spider 1.1 into my 1.6a xbox and now the machine frags when chip is armed. when not armed my softmod loads fine. When machine frags there is no video. I am thinking maybe my chip isnt hitting bottom of pin header some of the pins are a lil unlevel. Could that be the problem? I mean they are barely off. I guess stranger things have happened. thanks for the help in advance.





Logged

HackDaBox

  • Guest
Soldered A Spiderchip 1.1
« Reply #1 on: July 04, 2007, 06:46:17 AM »




Apply some pressure to the chip and and see if it still frags ?

Re-solder all joints adding a little extra solder to each one !

Use a digital multimeter to test each joint for continuity !

HackDaBox !






Logged
 

Page created in 0.315 seconds with 16 queries.