xbox-scene.com archived forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

xbox-scene.com forum restored.  registration disabled.  thanks to xboxexpert for the db dump and netham45 for cleaning it up!

Pages: 1 [2] 3 4

Author Topic: Xbox 360 Motherboard Component List  (Read 1104 times)

ttkkee2

  • Guest
Xbox 360 Motherboard Component List
« Reply #15 on: May 20, 2008, 02:21:25 AM »


Anybody?




Logged

ttkkee2

  • Guest
Xbox 360 Motherboard Component List
« Reply #16 on: May 29, 2008, 08:09:54 AM »


Maybe was it 4'7 ,uF?




Logged

gimpydingo

  • Guest
Xbox 360 Motherboard Component List
« Reply #17 on: May 29, 2008, 08:26:49 AM »


Anyone know what these are and where to get one? A friend knocked one off from the backside of the mobo/processor.


http://img522.images...image=icix1.jpg




Logged

RDC

  • Guest
Xbox 360 Motherboard Component List
« Reply #18 on: May 29, 2008, 10:11:43 AM »


You know the values of this element? C9D4

It's fine missing, if ya want one that's the same value you'll have to pull it from another 360 board, no one has all the component values yet. If ya want a guess I'd say they're just 0.1uf or 0.01uf, they're just filter caps is all, could be anything under 1uf really, 0.47uf would work as well and it doesn't need to be any specific value.

Anyone know what these are and where to get one? A friend knocked one off from the backside of the mobo/processor.
http://img522.images...image=icix1.jpg

They're Capacitors and it's fine missing a few of them, not going to hurt a thing.




Logged

gimpydingo

  • Guest
Xbox 360 Motherboard Component List
« Reply #19 on: May 29, 2008, 11:17:27 AM »


They're Capacitors and it's fine missing a few of them, not going to hurt a thing.


Hmm well it's definitley RRoD and no video. I can hear it boot up, but get 2 red flashign lights....thoughts?




Logged

RDC

  • Guest
Xbox 360 Motherboard Component List
« Reply #20 on: May 29, 2008, 12:19:10 PM »


I think if you think that cap missing is causing it you're not thinking right. wink.gif

2RL is overheating. You've obviously bit off more than ya can chew with this thing. Get out the magnifying glass and go looking for any other missing components or possibly traces that were gouged and are now cut. Could be how you have the heatsinks mounted, could be too loose, could be too tight causing a short or other open on some BGA joint, either way I hope they're at least on there or you'll know why it's throwing the 2RL.




Logged

gimpydingo

  • Guest
Xbox 360 Motherboard Component List
« Reply #21 on: May 29, 2008, 01:45:06 PM »


Thanks for the help. I'll take a look tonight and see what I can find.




Logged

ttkkee2

  • Guest
Xbox 360 Motherboard Component List
« Reply #22 on: June 25, 2008, 01:42:14 PM »


It's fine missing, if ya want one that's the same value you'll have to pull it from another 360 board, no one has all the component values yet. If ya want a guess I'd say they're just 0.1uf or 0.01uf, they're just filter caps is all, could be anything under 1uf really, 0.47uf would work as well and it doesn't need to be any specific value.
They're Capacitors and it's fine missing a few of them, not going to hurt a thing.


It works!!! I tried with other capacitor with the same size and colour from an older network card.




Edited by ttkkee2, 25 June 2008 - 09:44 PM.


Logged

kew1701

  • Guest
Xbox 360 Motherboard Component List
« Reply #23 on: October 16, 2008, 10:23:18 AM »


It works!!! I tried with other capacitor with the same size and colour from an older network card.


Hi,i wanna know if the side matters on how i solder them or not? i mean--->these capacitors have one + and one - side,correct




Logged

CrackHour

  • Guest
Xbox 360 Motherboard Component List
« Reply #24 on: October 21, 2008, 12:31:28 PM »


How about R3D4 I think they're 1kohm but not sure about wattage or if it matters.

Hi,i wanna know if the side matters on how i solder them or not? i mean--->these capacitors have one + and one - side,correct


Is there another nearby, they should orient the same way. PCB's are usually designed that way.





Logged

RDC

  • Guest
Xbox 360 Motherboard Component List
« Reply #25 on: October 21, 2008, 01:18:35 PM »


How about R3D4 I think they're 1kohm but not sure about wattage or if it matters.

R3D4 is a 60 Ohm 1/16W 0402 SMT Resistor. Ya can use any W rating ya like though.

Hi,i wanna know if the side matters on how i solder them or not? i mean--->these capacitors have one + and one - side,correct

The small SMT caps with no markings can be installed either way, they are not polarized.




Logged

CrackHour

  • Guest
Xbox 360 Motherboard Component List
« Reply #26 on: October 21, 2008, 01:46:43 PM »


Thanks RDC I measured it but I got 1000 ohms, I thought it might be wrong cause it seems kinda small to be that high. In case it matters I got error code 0031 with that resistor removed from board, not on purpose. OOOoooopps.




Logged

RDC

  • Guest
Xbox 360 Motherboard Component List
« Reply #27 on: October 21, 2008, 03:31:35 PM »


The size of the Resistor has nothing to do with it's Ohm value, Watt rating yes, but Ohm wise it could be any value really.




Logged

CrackHour

  • Guest
Xbox 360 Motherboard Component List
« Reply #28 on: October 22, 2008, 09:50:01 AM »


The size of the Resistor has nothing to do with it's Ohm value, Watt rating yes, but Ohm wise it could be any value really.


I found some 56 ohm resistor with 1/10th watt at 5% these are the closest I could find at the store near me.
I think these will work but not sure.





Logged

RDC

  • Guest
Xbox 360 Motherboard Component List
« Reply #29 on: October 23, 2008, 03:59:56 AM »


They should do fine, the thing just seems to be a pull-up on the CLK line anyway, so anything around 60Ohms should be alright to use.

Size wise ya may have to mess with it to get it to fit, but the 56Ohm value of it should be alright to use.




Logged
Pages: 1 [2] 3 4
 

Page created in 0.116 seconds with 15 queries.