xbox-scene.com archived forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

xbox-scene.com forum restored.  registration disabled.  thanks to xboxexpert for the db dump and netham45 for cleaning it up!

Author Topic: No Vid Or Audio Got Bad Eeprom  (Read 189 times)

Dodgeboy

  • Guest
No Vid Or Audio Got Bad Eeprom
« on: March 10, 2005, 07:08:28 PM »


Here goes.  Got a 1.6v xbox.  Buddies 4 year old found his way into the main settings and messed up the video modes and set it to pal.  Went back in and set it back to ntsc.  Booted system.  No picture at all but had audio.  Took PaulY and someone elses advice on how to flash an eeprom.  Using an XChip by the way.  Wow, picture came up.  Rebooted system and now no picture or audio now.  Since the eeprom was from a different version xbox, I got another xbox 1.6 but not sure if they are both a's or b's or mixed.  Still the same problem.  Tried restoring eeprom and nothing.

I used the method of getting eeprom using slayer's, ftp and inject into the proper bios need.  

Any suggestions would be appreciated.





Logged

christineyoung

  • Guest
No Vid Or Audio Got Bad Eeprom
« Reply #1 on: March 13, 2005, 03:43:18 PM »


a or b shoudl not matter.


Boot the xchip in working 1.6 and do a eeprom backup in evox.

Now connect xchip to the non working 1, with programmed hooked up and hold teh black button on programmer for 5 seconds after pressing power.  This will copy over the epprom you backed up. Wait about 30 seconds and you may need to power off/on xbox and should get video back..




Logged

Emerica

  • Guest
No Vid Or Audio Got Bad Eeprom
« Reply #2 on: February 02, 2008, 11:20:40 PM »


Hate to bring up an oldy like this, but.
If he had not reflashed in the first place would he need the other 1.6 box?

I'm stuck in the same spot, Box was set to pal, changed to ntsc_m, now audio only.
Will the button on the usb dongle help me out?




Logged
 

Page created in 0.115 seconds with 15 queries.