Hi. I bought X360 with ms28 drive spoofed as liteon with 1.4 ixtreme. I flashed it to 1.5 with iprep, but I flashed my friend's one with jungleflasher (just like mine, ms28 spoofed as liteon, 1.4->1.5)
Now I want to update firmware from 1.5 to 1.51 and I'm unsure what to do.
I have the newest JungleFlasher and the tutorial. The tutorial, however, says very little about unlocking samsung ms28 with ix 1.5 - only one small image. So it's possible I unlocked it incorrectly and that's why it didn't work.
What I did:
1) Connected 360 drive to VIA SATA Card via SATA cord
2) 360 drive connected to X360 via power cord
3) Ran both PC and Xbox
4) Ran JungleFlasher
5) Clicked MTKFlash32 Tab, clicked the right port in MTKFlash32 tab (my drive appeared)
6) Ejected 360 drive tray
7) Pulled the 360 drive power cord out
8 )Pushed the tray halfway in
9) Inserted 360 drive power cord
There was no data in Flash Chip Properties, all fields were empty.
Now, that's interesting - when I flashed 1.4->1.5, I'm almost 100% sure it said it's samung ms28, and now in drive properties it says it's LiteOn!
10) Clicked Intro/Device ID
In Drive Properties "Drive in Vendor Mode!" appeared. No info in Flash Chip Properties, however. All fields empty. No signal of the 0x70 status.
11) Clicked "Read"
I got message "Invalid drive status" or something similar.
Any ideas?
PS Or maybe, because it is spoofed as Liteon, I should flash it as liteon?
http://forums.afterdawn.com/thread_view.cfm/755062This post has been edited by warnec: Mar 8 2009, 11:46 PM